How to solve the problem that the car charger automatically stops output after working for a period of time

The car charging port automatically stops output after working normally for a period of time, which may be caused by exhaustion of energy storage, low-power load mode design, or internal failure of the energy storage power supply. If your power supply has the following problems, please follow the steps in this article to troubleshoot and solve the output problem.

Phenomenon: The output is turned off after working normally for a period of time.

Please follow the steps below to resolve output issues

Steps: 1. Check the energy storage power supply display

​ ​ Press the power display switch to check whether the display has sufficient power. The battery is insufficient. After using it for a period of time, the battery is exhausted and the output will be automatically turned off.

Step 2: Check appliance power and understand usage time

​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​ When the power is in a low power state, it will be shut down for a fixed time and enter the small load energy-saving mode. The energy storage power supply automatically shuts down when the power consumption of the electrical equipment is lower than the designed power, and automatically shuts down the output after 12 hours. Models that support the APP can adjust the automatic shutdown time in the APP.

If there is no problem with the above, it is determined to be a circuit failure (after-sales maintenance)

Solution: Contact customer service personnel for repair and processing.