Error code F6

We sincerely apologise for the inconvenience caused. Please follow the troubleshooting steps below.

When the “F6” error appears while powering electrical devices:
1. Please let us know the name, model and power rating (in watts) of the electrical device connected when the “F6” error occurred.
2. To reset the unit: disconnect all devices from the AC output ports, then allow the power station to rest for approximately two hours to cool down fully. Then proceed with the following reset procedure:
• For Pro series units: press and hold both the DISPLAY and USB buttons simultaneously for 10 seconds.
If the display shows “8888” before returning to the normal interface, the reset has been completed successfully.

When the “F6” error appears during charging:
1. Please check your mains supply voltage.
Charging will not commence if the household supply voltage falls below 200 V.
In some areas, voltage fluctuations may occur—for example, lights flickering—indicating unstable supply.
3. High-temperature protection activation
Prolonged use with high-power loads may cause internal temperatures to rise, triggering thermal protection and displaying the “F6” error.
→ Allow the unit to cool for approximately four hours, then attempt the reset procedure and resume charging.
4. To help us assess the issue accurately, could you please share a clear photo or short video showing both the full unit and the display screen?

When the “F6” error appears while the power station is simultaneously charging *and* supplying power to a load:
1. Charging method
Please tell us how you are charging the portable power station—for example, via a standard AC wall socket, solar panel, or vehicle socket.
2. Output port in use
Please specify which output port (AC, DC, USB, etc.) you are using to power your device.
3. Connected device
Please provide the name, model and power rating (in watts) of the electrical device being powered.