| Weight | 33.45 kg |
| SKU | 21-0001-000279 |
| Bare weight | 29.89 kg |
| Dimensions (W × D × H) | 54.9 × 42.5 × 48.0 cm |
| Bare metal packaging | 457 × 367 × 350 mm |
| IP Rating | IP65 |
| Pollution degree | External housing: PD3; Internal housing: PD2 |
| IP Rating | Class I |
| Inverter topology | Isolated |
| Color | Silver Grey |
| Material | Aluminum alloy + plastic |
| Communication method | Wi-Fi, Bluetooth |
| Cell Chemistry Type | Lithium Iron Phosphate (LiFePO₄) |
| Total capacity / rated capacity | 40 Ah / 38 Ah |
| Rated battery voltage | 51.2 V DC |
| Battery voltage operating range | 46.4–58.4 V DC |
| Maximum charge/discharge current | 40 A / 40 A |
| Total energy / rated energy | 2048 Wh / 1945 Wh |
| Expandable | Yes |
| Expansion method | Stacked |
| What is the maximum number of battery packs that can be connected? | The Navi 2000 can only be expanded using the Navi 2000 battery pack, with batteries stacked together rather than connected via cables. A maximum of three Navi 2000 battery packs can be connected, achieving a total capacity of 8 kWh. |
| Supports connection to microinverters | Yes |
| Self-consumption when powered off.nsumption of the device | ≤10 µA |
| Self-consumption in standby mode | 10 W |
| No-load power consumption | / |
| On-load power consumption | 30W |
| Grounded | Yes |
| Can Bluetooth/Wi-Fi be reset? | Yes, but it requires a developer to perform the operation. |
| How to reset Bluetooth/Wi-Fi? | A developer performs the operation |
| Has Ethernet port | No |
| Can the device be reset? | Yes, but it requires a developer to perform the operation. |
| How to reset the device? | Yes, but it requires a developer to perform the operation. |
| How to restart the device? | Press and hold the power button for 3 seconds. |
| Temperature and air humidity monitoring function | Yes |
| Triple-protection warning available | Yes |
| Fire warning present | Yes |
| Supports parallel operation | No |
| Is API access enabled? | No |
| PV1/2 Input (Grid-connected) | DC input: Supports 17.5–60 V / up to 28 A; two inputs; maximum 1600 W |
| PV1/2 Input (Off-grid) | DC input: Supports 17.5–60 V / max. 28 A, 2 inputs; up to 1600 W |
| Number of MPPT circuits / Number of input strings | 2 |
| Supports car charger | Yes |
| Vehicle battery input | 11–17.5 V / 8 A |
| Short-circuit current | 0°C ≤ T < 5°C: 8 A
5°C ≤ T < 10°C: 16 A (stepwise increase from 5°C to 6°C)
10°C ≤ T < 15°C: 24 A (stepwise increase from 10°C to 11°C)
15°C ≤ T < 45°C: 34.8 A (stepwise decrease from 44°C to 45°C)
45°C ≤ T < 50°C: 16 A (stepwise decrease from 49°C to 50°C)
50°C ≤ T < 55°C: 8 A (stepwise decrease from 54°C to 55°C) |
| Overvoltage Category | 2 |
| PV connected | Yes |
| Maximum AC Input Power | 1800 W |
| Maximum AC input apparent power | 1800 W |
| Maximum AC input current | 7.83 A |
| Maximum AC Output Power | 800 W |
| Maximum AC output apparent power | 800 VA |
| Maximum AC output current | 5.22 A |
| Grid voltage | 220 / 230 V AC |
| Rated grid frequency | 50/60 Hz |
| Power factor range | 0.8 leading to 0.8 lagging |
| Can it be used off-grid? | Yes |
| Auto-switching time | 20 ms |
| AC voltage | 220 V AC – 230 V AC, 50 Hz |
| AC input/output power | 1200 W |
| Operating temperature | -20°C to 55°C (derating required above 45°C) |
| Operating humidity | 5% to 95% relative humidity (non-condensing) |
| Operating altitude | ≤ 2,000 m |
| Noise | < 10 dB(A) |
| Installation pitch | Top/Left/Right: >300 mm
Rear: >20 mm |
| Has self-heating function | Yes |
| Power loss of self-heating function | 140 W |
| Usage scenario | Basement, attic, garage, balcony, and other semi-indoor spaces |
| Is bidirectional inverter | Yes |
| Supports AC coupling | No |
| AC coupling function | / |
| PV Activation Power | 30 W |
| Safety/EMC standards | IEC 62133 / UL 1642 / IEC 62619 / UL 1973 / UL 9540A, EN 61000-6-1 / 6-3, 2014/53/EU RED |
| Grid Code | EN 50549-2 |
| User Interface | Jackery Home App |
| Has standby mode | Yes |
| Automatic standby mode activation condition | PV > 30 W |
| How to enter manual standby mode | Jackery Home APP - Settings -Device Control- Standby |
| How to enter automatic standby | No PV charging for 10 minutes
or
No load for 10 minutes |
| How to exit standby mode | Manual: Jackery Home APP - Settings -Device Control- Standby
Auto: PV input power present for 30 seconds
or
System load exceeds 40W for 30 seconds |
| How to disable standby mode | App – Quick Toggle – Disable Standby Mode |
| Compatible with Shelly Plus Plug S | Yes |
| Compatible with Shelly Plug S | Yes |
| Compatible with Shelly Plug S Gen3 | no |
| Compatible with Shelly Pro 3 EM 120A | Yes |
| Compatible with Shelly Pro 3EM-3CT63 | no |
| Compatible with Shelly Pro EM-50 | Yes |
| Compatible with Homey Energy Dongle for P1 Energy Meter | no |
| Compatible with HomeWizard P1 Meter(linky) | no |
| Is it compatible with the EverHome EcoTracker IR Reader? | no |
| Is it compatible with the EverHome EcoTracker P1 Reader? | no |
| Is it compatible with the Jackery Smart Meter 1P? | no |
| Is it compatible with the Jackery Smart Meter 3P? | no |
| Is it compatible with the Jackery Smart Meter TIC Reader? | no |
| Is it compatible with the Jackery Smart Meter D0 Reader? | no |
| Is it compatible with the Jackery Smart Meter P1 Reader? | no |
| Is it compatible with the Jackery Smart Plug? | no |
| Maximum number of compatible sockets | 4 |
| Maximum compatible meter quantity | The host and meter have a one-to-one mapping. A single host cannot be connected to multiple meters, nor can multiple hosts be connected to a single meter.
For three-phase power supply, one host can be installed per phase, with each host paired with its own meter. In this configuration, each host operates independently with no master-slave relationship, ensuring no mutual interference. Multiple hosts can be simultaneously managed under a single account via the Jackery Home App. |
| Operating Mode | Battery Priority: This product supports various operating modes under different power source and load configurations, configurable via the Jackery Home App. In Battery Priority mode, solar energy is first used to fully charge the battery; any surplus solar power supplies connected loads. If solar generation is insufficient, the grid simultaneously charges the battery and powers the loads.
Self-Consumption: In Self-Consumption mode, electricity generated by solar panels is stored in the power station and consumed directly by household appliances, thereby reducing residential electricity costs. Solar generation supplies connected loads first.
Time-of-Use (TOU) Mode: The power station’s TOU mode enables scheduled battery charging and discharging via the Jackery Home app, optimizing household energy usage according to time-varying electricity tariffs.
Smart Mode: This product supports dynamic electricity pricing—referred to as Smart Mode in the Jackery Home app. The app retrieves the next day’s dynamic tariff data from the utility provider in advance. By analyzing price trends, it intelligently schedules system charging and discharging—charging during low-price periods and discharging during high-price periods—to maximize cost savings. These smart features enable efficient utilization of dynamic tariffs and optimized home energy management for higher energy efficiency. |
| Supports mobile phone models and versions | Android version, iOS version |
| Web interface supported | No |
| Warranty period | 10 years |
| What's in the box | Jackery Navi 2000 × 1
Jackery AC On-Grid Cable (5 m) × 1
Jackery MC4 Solar Cable (3 m) × 2
MC4 Connector Wrench × 1
User Manual × 1 |
| What additional accessories can be purchased | 1.Foldable Trolley
-For mobile use
2.Smart Plug Pro – Smart Metering Plug
(Monitors power consumption. See the Jackery Home App user manual.
)
3.Flat MC4 Solar Cable (1.5 m)
(Used for PV connection through windows or doors
)
4.AC Extension Cable (15 m)
(Used for grid connection extension
)
5.MC4 Solar Cable (3 m)
(Used for connecting two pairs of PV ports
)
6.8020–MC4 Charging Cable (3 m)
(Used for battery charging via portable solar panels. See "Jackery Portable Solar Panel" on page 14)
7.KFZ–MC4 Charging Cable (2 m)
(Used for battery charging via vehicle. See "Charging from a Vehicle" on page 14) |
| Optional solar panel | 200×4 flexible solar panel
450 Wp rigid panel
500 Wp rigid panel
245W lightweight rigid panel |
| Contact email | hello.eu@jackery.com |
| Does it support Ethernet connection? | No |
| Does it support Home Assistant? | No |
Comments
0 comments
Article is closed for comments.