| Battery Capacity | 3072Wh |
| Type of Battery Used | Lithium Iron Phosphate Battery |
| Battery Cycle Life (Durability) | 4000 cycles (After 4000 cycles, the battery capacity can still remain at 70% of its original capacity.) |
| Type of Product Output Current | Pure sine wave |
| Product Dimensions (cm) (W)Length × (D)Width × (H)Height | 41.6×32.5×30.5cm |
| Product Weight | About 27kg |
| Product Color | Black |
| Product AC Input Specification | 220 V-240 V~ 50 Hz, 10 A Max. |
| Minimum Power Required for Product AC Input | 2100±50 watts or more |
| DC Input Specification (Solar Power Input Specification) | Supports 16-60V
Using one port: Current limit is 12A, maximum input power is 500W
Using both ports: Current limit is 24A, maximum input power is 1000W |
| DC Input Specification (Car Charger Input Specification) | 12V-16V DC power, current limit is 8A
(Whether using one or two DC input ports, the current limit is 8A.) |
| Number of Input Ports When Charging Product with DC (Panel Charger/Car Charger) | 2 |
| Input Port for Charging Product with Solar Panel | DC8020 |
| Input Port for Charging Product with Car Charger Port | DC8020 |
| Product AC Charging Time | 1.8 hours |
| Product Charging Time with Car Charger Port | Ca. 36 hours |
| Product Charging Time with Solar Panel Solarsaga40 | No Validation data |
| Product Charging Time with Solar Panel Solarsaga80 | No Validation data |
| Product Charging Time with Solar Panel Solarsaga100 | 1 piece: Ca. 44 hours;
2 pieces: Ca. 22 hours;
4 pieces: Ca. 12 hours |
| Product Charging Time with Solar Panel Solarsaga200 | 1 piece: Ca. 22 hours;
2 pieces: Ca. 11 hours;
4 pieces: 5.5 hours |
| Product AC Output Specification | Single port 230V/2200W/ Multiple ports 3600W |
| Product Maximum Instantaneous Discharge Power | 7200W |
| Number of Product AC Output Ports | 5 |
| AC Output Frequency | This device features selectable 50Hz/60Hz dual-frequency AC output.
Auto Mode (Recommended for initial use): Upon first AC charging connection, the device will automatically detect and lock the output frequency based on the local grid standard.
Manual Mode: Press and hold the AC output button to toggle between 50Hz and 60Hz. The selected frequency is displayed on the screen in real time.
Default Setting: The factory default output frequency is 50Hz. |
| Product Car Charger Port Specification | 12V/10A |
| Number of Product Car Charger Ports | 1 |
| Number of Product USB Ports | 4 |
| Product USB-A Port Output Specification | 5-6V3A, 6-9V2A, 9-12V1.5A, up to 18W |
| Product Specification for Input via USB-C Port | No USB-C Input Port |
| Product USB-C Port Output Specification | 5V3A, 9V3A, 12V3A, 15V3A, 20V5A, up to 100W |
| Temperature Range for Product Charging | 0℃-40℃ |
| Temperature Range for Product Operation | -15°C-45°C |
| Temperature Range for Product Storage | 1 month -20℃-45℃ (-4℉-113℉);
3 months 0℃-45℃ (32℉-113℉);
1 year 0℃-25℃ (32℉-77℉) |
| Material of Product Housing | PC+ABS High-Strength Plastic |
| Product Warranty Period | The standard warranty period is 3 years. After registering for warranty, it can be extended by 2 years, up to a maximum of 5 years warranty.
Purchased on the official website: Automatic warranty extension (no registration needed). Orders purchased on Amazon or from dealers require customers to register for the extended warranty themselves. |
| Package list | 1* Explorer 3000 Portable Power Station;
1* AC Charger Cable;
1* User Manual |
| Noise Level of Product Cooling Fan | ≤30dB |
| Standby Power Consumption | 22W |
| Does it Have UPS Function | Connect the appliance plug to the AC output port of the portable power supply, and at the same time, use the AC charging cable to connect the portable power supply to a household outlet. Even in the event of a power outage, it can automatically switch to battery power supply mode within 20ms (0.02 seconds) with UPS functionality.
Even with a sudden power outage, it can continue to supply power within the remaining battery capacity of the portable power supply.
Note:
・This function is not a 0ms (non-interruptible) switch UPS function.
・Please do not use this function for devices that require an uninterruptible power supply, such as data servers or workstations. |
| Are Additional Accessories Needed When Connecting to the Board | Connection for 1 or 2 solar panels: Use the included cable in the package. No additional purchase needed;
Connection for 4 solar panels: Requires SolarSaga Adapter (Pro/Plus/V2) ×2 |
| Maximum Number of Panels That Can Be Connected | Supports connection of 1/2/4 panels |
| Can Products be Charged | When using the AC output of portable power Supply A to charge this power supply, if A's 'AC output' is 1500W or above, it can be supported. |
| Maximum AC output power during simultaneous charging and discharging | 3600W |
| Maximum DC output (car charging port output) power during simultaneous charging and discharging | 12V,10A, up to 120 watts |
| Can the product connect to 2 solar panels | It is supported. However, the two DC input ports are in parallel, so different wattage solar panels cannot be connected simultaneously. In other words, it is not possible to have one port connected to 100W and another to 200W. |
| Can the product connect to 3 or more solar panels | Does not support 3 panels. Connection for 4 panels: Connect each pair of panels to their respective adapters, and then connect them to DC input 1 and DC input 2 respectively. Notes for connecting 4 panels: The conversion adapter at the front panel, depending on the model, needs to be 'removed' or 'connected directly to the SolarSaga adapter'. Notes for using both DC ports simultaneously (connection rules): The number of panels connected to each port must be the same (e.g., 2+2). A total of up to 4 panels can be connected to both ports. Please use solar panels of the same model. If different models are to be mixed, all of the following conditions must be met: - Same maximum output wattage - Same open circuit voltage - Same operating voltage (rated voltage). ＜Examples of compatible combinations＞・100C (Max output: 100 watts / Operating voltage: 20 volts / Open circuit voltage: 24.8 volts)・100F (Max output: 100 watts / Operating voltage: 20 volts / Open circuit voltage: 24.8 volts). As shown above, even if the models are different, panels can be mixed if the maximum output, operating voltage, and open circuit voltage are the same. |
| Are the two DC input ports parallel or independent | Parallel |
| Connection rules when both DC ports are used simultaneously | The power station has two DC input ports, with each port able to connect up to two panels. The panels connected to each port must have the same output and model. (For example, all using 100W (JS-100F) or all using 200W (JS-200D)). When using both DC input ports simultaneously, the number of panels connected must also be the same. |
| Can the product charge using both solar panels and car charging at the same time | Not allowed |
| Can the product charge using two car charging cables simultaneously | Not allowed |
| Is it expandable | No extension function |
| Is there a corresponding APP | Yes |
| Does it have waterproof and dustproof functions | No |
| Can the AC output frequency be switched | Yes |
| Does it have parallel machine function | No |
| Does it have LED lighting | Yes |
| Can it charge with fast charging on the road | Yes |
| Charging time with fast charging on the road | About 5.6 hours |
| Can wall charging and Solar charging be performed simultaneously | Yes |
| Can the Energy Saving Mode be turned off | Yes |
| Is the real-time system status visible in the app | Yes |
| Is remote control of AC/DC output circuits available in the app? | Yes |
| Is it possible to set timers for the display’s sleep mode in the app? | Yes |
| Can the built-in LED work light be controlled from the app? | Yes |
| Is it possible to set automatic shutdown in the app | Yes |
| Is it possible to set Battery Saving Mode in the app | Yes |
| Is it possible to set Quiet Charging Mode in the app | Yes |
| Can product specifications be viewed in the app | Yes |
| Can the user manual be accessed through the app | Yes |
| Can the device be shared using a QR code | Yes |
| Can the temperature display be set in the app | Yes |
| Is it possible to configure the system language through the app | Yes |
| Is it possible to set the Battery saving mode (15% to 85%) in the app | Yes |
| Is it possible to adjust the charging range of the battery shallow charge and discharge mode in the app | No |
| Is it possible to set the emergency charging mode in the app | Yes |
| Does it have solar power generation analysis (Analytics) function | Yes |
| Does it have a timed charging (charging plan) function | Yes |
| Does this system have a Self-consumption Mode | Yes |
| Can the Wi-Fi MAC address be viewed in the app | No |
| Is it possible to set AC charging speed in the app | No |
| Can the AC/DC output time be set through the APP? | No |
| Does it support simultaneous charging and discharging? | Yes, it is supported.
In addition, when designing, consideration was given to the fact that even during pass-through charging, the battery would not be burdened, so charging while in use does not affect the life of the portable power source. Please use with confidence. |
| Protocol-QC3.0 | yes |
| Protocol-PD | yes |
| BMS Protection System | 12 Types of Protection |
| Temperature Control Probes | x9 |
| Fire Resistance Rating | UL 94-V0 |
| Shock-Resistant Level | 9 Level |
| Location of the SN | The SN is located on the back of the device. |
| SN Format | A combination of 15 digits in total. |
| How to turn off the device | Press and hold the power button for 3 seconds. |
| How to reset the device | Press and hold both the Power and USB buttons simultaneously for five seconds. The screen will briefly turn off and then relight, displaying the remaining battery percentage — this confirms the reset was successful. |
| Can Wi-Fi/Bluetooth be reset separately | Yes |
| How to reset Wi-Fi/Bluetooth | Press and hold both the Power and USB buttons simultaneously for five seconds. The screen will briefly turn off and then relight, displaying the remaining battery percentage — this confirms the reset was successful. |
| How to activate the Bluetooth/Wi-Fi module after it has been turned off. | Press and hold the USB and AC buttons simultaneously for 3 seconds. |
Comments
0 comments
Article is closed for comments.