| Battery Capacity | 1070Wh |
| Type of Battery Used | Lithium Iron Phosphate Battery |
| Battery Cycle Life (Durability) | 4000 cycles (After 4000 cycles, the battery capacity can still remain at 70% of its original capacity.) |
| Type of Product Output Current | Pure sine wave |
| Product Dimensions (cm) (W)Length × (D)Width × (H)Height | 32.7×22.4×24.7 cm |
| Product Weight | About 10.8kg |
| Product Color | Black |
| Product AC Input Specification | 220 V-240 V~ 50 Hz, 10 A Max. |
| Minimum Power Required for Product AC Input | 1000±50 watts or more |
| DC Input Specification (Solar Power Input Specification) | Compatible with 16-60V, when using one port: current limit is 10.5A, maximum input power is 200W; when using two ports simultaneously: current limit is 21A, maximum input power is 400W |
| DC Input Specification (Car Charger Input Specification) | 12-16V (voltage range)∿Current limit is 8A (regardless of using one or two DC input ports, the current limit is 8A) |
| Number of Input Ports When Charging Product with DC (Panel Charger/Car Charger) | 2 |
| Input Port for Charging Product with Solar Panel | DC8020 |
| Input Port for Charging Product with Car Charger Port | DC8020 |
| Product AC Charging Time | Ca. 1.7 hours |
| Product Charging Time with Car Charger Port | Ca. 12 hours |
| Product Charging Time with Solar Panel Solarsaga40 | No verification data |
| Product Charging Time with Solar Panel Solarsaga80 | No verification data |
| Product Charging Time with Solar Panel Solarsaga100 | 1 piece: about 15 hours;
2 pieces: about 8 hours;
4 pieces: about 4 hours |
| Product Charging Time with Solar Panel Solarsaga200 | 1 piece: about 7.5 hours;
2 pieces: about 3.8 hours |
| Product AC Output Specification | 230VAC, 50Hz, 1500W |
| Product Maximum Instantaneous Discharge Power | 3000W |
| Number of Product AC Output Ports | 3 |
| AC Output Frequency | This device features selectable 50Hz/60Hz dual-frequency AC output.
Auto Mode (Recommended for initial use): Upon first AC charging connection, the device will automatically detect and lock the output frequency based on the local grid standard.
Manual Mode: Press and hold the AC output button to toggle between 50Hz and 60Hz. The selected frequency is displayed on the screen in real time.
Default Setting: The factory default output frequency is 50Hz. |
| Product Car Charger Port Specification | 12V/10A |
| Number of Product Car Charger Ports | 1 |
| Number of Product USB Ports | 4 |
| Product USB-A Port Output Specification | Maximum 18W |
| Product Specification for Input via USB-C Port | No USB-C input port |
| Product USB-C Port Output Specification | 1*USB-C: Maximum 100W, 1*USB-C: Maximum 30W |
| Temperature Range for Product Charging | 0℃-40℃ |
| Temperature Range for Product Operation | -10°C-45°C |
| Temperature Range for Product Storage | 1 month -20℃-45℃ (-4℉-113℉);
3 months 0℃-45℃ (32℉-113℉);
1 year 0℃-25℃ (32℉-77℉) |
| Material of Product Housing | PC+ABS High-strength plastic |
| Product Warranty Period | The standard warranty period is 3 years. After registering for warranty, it can be extended by 2 years, for a maximum of 5 years of warranty. Purchased on the official website: Automatic warranty extension (no registration needed). Orders purchased on Amazon or from dealers require customers to register for the extended warranty themselves. |
| Package list | 1* Explorer 1000V2 Portable Power Station;
1* AC charging cable;
1*User Manual |
| Noise Level of Product Cooling Fan | ≤22dB |
| Standby Power Consumption | 18W |
| Does it Have UPS Function | Insert the appliance plug into the AC output port of the portable power station, and simultaneously use the AC charging cable to connect the portable power station to a household outlet. It will automatically switch to battery power mode within 20ms (0.02 seconds) in case of a power outage, providing UPS functionality. During an emergency power outage, it can continue to provide power within the battery capacity range of the portable power station. |
| Are Additional Accessories Needed When Connecting to the Board | 1 or 2 solar panels connection: Connect with the included cables. No additional purchase needed. 4 solar panels connection: Requires SolarSaga Adapter (Pro/Plus/V2) ×2 |
| Maximum Number of Panels That Can Be Connected | Supports connection of 1/2/4 panels |
| Can Products be Charged | When charging this power station from PowerA's AC output, if A's 'AC output' is 1000W+50W or above, it is compatible. |
| Maximum AC output power during simultaneous charging and discharging | 1500W |
| Maximum DC output (car charging port output) power during simultaneous charging and discharging | 12 volts, 10 amps, maximum 120 watts |
| Can the product connect to 2 solar panels | It is supported. However, the two DC input ports are connected in parallel, so solar panels with different wattages cannot be connected simultaneously. That is, it is not possible to have one port connected to 100W and another to 200W. |
| Can the product connect to 3 or more solar panels | Does not support 3 panels. For 4 panels, connect each pair of panels to their respective adapters and then connect to DC input 1 and DC input 2. When connecting 4 panels, pay attention to the following: the conversion adapter at the front panel must be 'removed' or 'connected directly to the SolarSaga adapter' depending on the model. When using both DC ports at the same time（connection rules）include: the number of panels connected to each port must be the same (e.g., 2+2). A maximum of 4 panels can be connected across both ports, and solar panels must be of the same model. If different models are to be mixed, all of the following conditions must be met: the maximum output wattage must be the same, the open circuit voltage must be the same, and the operating voltage (rated voltage) must be the same. ＜Examples of compatible panels＞・100C (Max Output: 100 watts / Operating Voltage: 20 volts / Open Circuit Voltage: 24.8 volts)・100F (Max Output: 100 watts / Operating Voltage: 20 volts / Open Circuit Voltage: 24.8 volts). As shown, if the maximum output, operating voltage, and open circuit voltage are the same, panels of different models can be mixed. |
| Are the two DC input ports parallel or independent | Parallel |
| Connection rules when both DC ports are used simultaneously | The power station has two DC input ports, and each port can connect up to 2 panels. Panels connected to each port must be consistent in output and model. (e.g., all using 100 watts (JS-100F) or all using 200 watts (JS-200D)). Additionally, if both DC input ports are used at the same time, the number of panels connected must also be consistent. |
| Can the product charge using both solar panels and car charging at the same time | Not allowed |
| Can the product charge using two car charging cables simultaneously | Not allowed |
| Is it expandable | No extension function |
| Is there a corresponding APP | Yes |
| Does it have waterproof and dustproof functions | No |
| Can the AC output frequency be switched | Yes |
| Does it have parallel machine function | No |
| Does it have LED lighting | Yes |
| Can it charge with fast charging on the road | Yes |
| Charging time with fast charging on the road | Ca. 3 hours |
| Can wall charging and Solar charging be performed simultaneously | Yes |
| Can the Energy Saving Mode be turned off | Yes |
| Is the real-time system status visible in the app | Yes |
| Is remote control of AC/DC output circuits available in the app? | Yes |
| Is it possible to set timers for the display’s sleep mode in the app? | Yes |
| Can the built-in LED work light be controlled from the app? | Yes |
| Is it possible to set automatic shutdown in the app | Yes |
| Is it possible to set Battery Saving Mode in the app | Yes |
| Is it possible to set Quiet Charging Mode in the app | Yes |
| Can product specifications be viewed in the app | Yes |
| Can the user manual be accessed through the app | Yes |
| Can the device be shared using a QR code | Yes |
| Can the temperature display be set in the app | Yes |
| Is it possible to configure the system language through the app | Yes |
| Is it possible to set the Battery saving mode (15% to 85%) in the app | Yes |
| Is it possible to adjust the charging range of the battery shallow charge and discharge mode in the app | No |
| Is it possible to set the emergency charging mode in the app | Yes |
| Does it have solar power generation analysis (Analytics) function | No |
| Does it have a timed charging (charging plan) function | No |
| Does this system have a Self-consumption Mode | No |
| Can the Wi-Fi MAC address be viewed in the app | No |
| Is it possible to set AC charging speed in the app | No |
| Can the AC/DC output time be set through the APP? | No |
| Does it support simultaneous charging and discharging? | Yes, it can correspond. Furthermore, even when using pass-through charging, it is made in a way that the battery will not be burdened, so using the portable power supply while charging will not affect its lifespan. Please rest assured. |
| Protocol-QC3.0 | yes |
| Protocol-PD | yes |
| BMS Protection System | no |
| Temperature Control Probes | no |
| Fire Resistance Rating | UL 94-V0 |
| Shock-Resistant Level | 9 Level |
| Location of the SN | The SN is located on the back of the device. |
| SN Format | A combination of 15 digits in total. |
| How to turn off the device | Press and hold the power button for 3 seconds. |
| How to reset the device | Press and hold both the Power and USB buttons simultaneously for five seconds. The screen will briefly turn off and then relight, displaying the remaining battery percentage — this confirms the reset was successful. |
| Can Wi-Fi/Bluetooth be reset separately | Yes |
| How to reset Wi-Fi/Bluetooth | Press and hold both the Power and USB buttons simultaneously for five seconds. The screen will briefly turn off and then relight, displaying the remaining battery percentage — this confirms the reset was successful. |
| How to activate the Bluetooth/Wi-Fi module after it has been turned off. | Press and hold the USB and AC buttons simultaneously for 3 seconds. |
Comments
0 comments
Article is closed for comments.