| model_name | JE-2000D |
|---|---|
| Battery Capacity | 2042Wh |
| Type of Battery Used | Lithium Iron Phosphate Battery |
| Battery Cycle Life (Durability) | 4000 cycles(After 4000 cycles, the battery capacity can still remain at 70% of its original capacity.) |
| Type of Product Output Current | Pure sine wave |
| Product Dimensions (cm) (W)Length × (D)Width × (H)Height | 33.5×26.4×29.2 cm |
| Product Weight | About 17.9kg |
| Product Color | Black |
| Product AC Input Specification | 220 V-240 V~ 50 Hz, 10 A Max. |
| Minimum Power Required for Product AC Input | 2000±50 watts or more |
| DC Input Specification (Solar Power Input Specification) | Supports 16-60V, Using one port: current limit is 12A, max input power 200W, Using two ports simultaneously: current limit is 21A, max input power 400W |
| DC Input Specification (Car Charger Input Specification) | 11V-16V DC 8A, current limit 8A, (Whether using one or two DC input ports, the current limit is 8A.) |
| Number of Input Ports When Charging Product with DC (Panel Charger/Car Charger) | 2 |
| Input Port for Charging Product with Solar Panel | DC8020 |
| Input Port for Charging Product with Car Charger Port | DC8020 |
| Product AC Charging Time | About 2 hours |
| Product Charging Time with Car Charger Port | About 24 hours |
| Product Charging Time with Solar Panel Solarsaga40 | No validation data |
| Product Charging Time with Solar Panel Solarsaga80 | No validation data |
| Product Charging Time with Solar Panel Solarsaga100 | 1 piece: about 28 hours; 2 pieces: about 14 hours; 4 pieces: about 7 hours |
| Product Charging Time with Solar Panel Solarsaga200 | 1 piece: about 12 hours; 2 pieces: about 7.5 hours |
| Product AC Output Specification | 230V, 50Hz, 10A, 2200W |
| Product Maximum Instantaneous Discharge Power | 4400W |
| Number of Product AC Output Ports | 3 |
| AC Output Frequency | This device features selectable 50Hz/60Hz dual-frequency AC output. Auto Mode (Recommended for initial use): Upon first AC charging connection, the device will automatically detect and lock the output frequency based on the local grid standard. Manual Mode: Press and hold the AC output button to toggle between 50Hz and 60Hz. The selected frequency is displayed on the screen in real time. Default Setting: The factory default output frequency is 50Hz. |
| Product Car Charger Port Specification | 12V/10A |
| Number of Product Car Charger Ports | 1 |
| Number of Product USB Ports | 3 |
| Product USB-A Port Output Specification | Maximum 18W |
| Product Specification for Input via USB-C Port | No USB-C input port |
| Product USB-C Port Output Specification | 1*USB-C: Maximum 100W, 1*USB-C: Maximum 30W |
| Temperature Range for Product Charging | 0℃-40℃ |
| Temperature Range for Product Operation | -10°C-45°C |
| Temperature Range for Product Storage | 1 month -20℃-45℃ (-4℉-113℉); 3 months 0℃-45℃ (32℉-113℉); 1 year 0℃-25℃ (32℉-77℉) |
| Material of Product Housing | PC+ABS High-Strength Plastic |
| Product Warranty Period | The standard warranty period is 3 years. After registering for warranty service, it can be extended by 2 years, for a maximum of 5 years of warranty. Purchased on the official website: automatic warranty extension (no registration required). Orders purchased on Amazon or from dealers require customers to register for the extended warranty themselves. |
| Package list | 1* Explorer 2000 v2 Portable Power Station; 1 * AC Charging Cable； 1*User Manual |
| Noise Level of Product Cooling Fan | ≤30dB |
| Standby Power Consumption | 18W |
| Does it Have UPS Function | Connect the electrical plug to the AC output port of the portable power station, and use the AC charging cable to connect the portable power station to a household outlet. Even during a power outage, it can switch to battery power mode within 20 milliseconds (0.02 seconds) with the UPS function. It can also continuously power during sudden power outages within the battery capacity of the portable power station. |
| Are Additional Accessories Needed When Connecting to the Board | 1 or 2 solar panel connections: Connectable with the included cables. No additional purchase needed; 4 solar panel connections: Requires SolarSaga adapter (Pro/Plus/V2) ×2 |
| Maximum Number of Panels That Can Be Connected | Supports connection of 1/2/4 panels |
| Can Products be Charged | When using Pabble power supply A's AC output to charge this power supply, if A's 'AC output' power is above 1500W, it is supported. |
| Maximum AC output power during simultaneous charging and discharging | 2200W |
| Maximum DC output (car charging port output) power during simultaneous charging and discharging | 12V, 10A, maximum 120W |
| Can the product connect to 2 solar panels | It is supported. However, the two DC input ports are connected in parallel, so different wattage solar panels cannot be connected simultaneously. That is, it is not possible to have one port connected to 100W and another to 200W. |
| Can the product connect to 3 or more solar panels | Does not support 3 panels. For connecting 4 panels: Connect each pair of panels to their respective adapters and then to DC input 1 and DC input 2. Notes for connecting 4 panels: The conversion adapter on the front panel must be 'removed' or 'directly connected to the SolarSaga adapter' depending on the model. Notes for using both DC ports at the same time (connection rules): The number of panels connected to each port must be the same (e.g., 2+2). A total of up to 4 panels can be connected to both ports. Panels of the same model should be used. If different models are to be mixed, all of the following conditions must be met: - Same maximum output wattage - Same open-circuit voltage - Same operating voltage (rated voltage). : ・100C (Max output: 100 watts / Operating voltage: 20 volts / Open-circuit voltage: 24.8 volts) ・100F (Max output: 100 watts / Operating voltage: 20 volts / Open-circuit voltage: 24.8 volts) As shown above, if the maximum output, operating voltage, and open-circuit voltage are all the same, different models can be mixed even if they are not the same. |
| Are the two DC input ports parallel or independent | Parallel |
| Connection rules when both DC ports are used simultaneously | The power station has two DC input ports, and each port can connect up to two panels. The panels connected to each port must be of the same output and model. (For example: all using 100W (JS-100F) or all using 200W (JS-200D)). Additionally, if both DC input ports are used simultaneously, the number of panels connected must also be the same. |
| Can the product charge using both solar panels and car charging at the same time | Not allowed |
| Can the product charge using two car charging cables simultaneously | Not allowed |
| Is it expandable | No expansion function |
| Is there a corresponding APP | Yes |
| Does it have waterproof and dustproof functions | No |
| Can the AC output frequency be switched | Yes |
| Does it have parallel machine function | No |
| Does it have LED lighting | Yes |
| Can it charge with fast charging on the road | Yes |
| Charging time with fast charging on the road | Ca. 5.6 hours |
| Can wall charging and Solar charging be performed simultaneously | Yes |
| Can the Energy Saving Mode be turned off | Yes |
| Is the real-time system status visible in the app | Yes |
| Is remote control of AC/DC output circuits available in the app? | Yes |
| Is it possible to set timers for the display’s sleep mode in the app? | Yes |
| Can the built-in LED work light be controlled from the app? | Yes |
| Is it possible to set automatic shutdown in the app | Yes |
| Is it possible to set Battery Saving Mode in the app | Yes |
| Is it possible to set Quiet Charging Mode in the app | Yes |
| Can product specifications be viewed in the app | Yes |
| Can the user manual be accessed through the app | Yes |
| Can the device be shared using a QR code | Yes |
| Can the temperature display be set in the app | Yes |
| Is it possible to configure the system language through the app | Yes |
| Is it possible to set the Battery saving mode (15% to 85%) in the app | Yes |
| Is it possible to adjust the charging range of the battery shallow charge and discharge mode in the app | No |
| Is it possible to set the emergency charging mode in the app | Yes |
| Does it have solar power generation analysis (Analytics) function | No |
| Does it have a timed charging (charging plan) function | No |
| Does this system have a Self-consumption Mode | No |
| Can the Wi-Fi MAC address be viewed in the app | No |
| Is it possible to set AC charging speed in the app | No |
| Can the AC/DC output time be set through the APP? | No |
| Does it support simultaneous charging and discharging? | Yes, it is supported. In addition, the design ensures that there will be no burden on the battery when using pass-through charging, so using the portable power supply while charging will not affect its lifespan. Please use with confidence. |
| Protocol-QC3.0 | yes |
| Protocol-PD | yes |
| BMS Protection System | 12 Types of Protection |
| Temperature Control Probes | x6 |
| Fire Resistance Rating | UL 94-V0 |
| Shock-Resistant Level | 9 Level |
| Location of the SN | The SN is located on the back of the device. |
| SN Format | A combination of 15 digits in total. |
| How to turn off the device | Press and hold the power button for 3 seconds. |
| How to reset the device | Press and hold both the Power and USB buttons simultaneously for five seconds. The screen will briefly turn off and then relight, displaying the remaining battery percentage — this confirms the reset was successful. |
| Can Wi-Fi/Bluetooth be reset separately | Yes |
| How to reset Wi-Fi/Bluetooth | Press and hold both the Power and USB buttons simultaneously for five seconds. The screen will briefly turn off and then relight, displaying the remaining battery percentage — this confirms the reset was successful. |
| How to activate the Bluetooth/Wi-Fi module after it has been turned off. | Press and hold the USB and AC buttons simultaneously for 3 seconds. |
Explorer 2000 V2 Basic Information
5 user found this helpful