| model_name | JE-1000C |
|---|---|
| Battery Capacity | 1264Wh |
| Type of Battery Used | Lithium Iron Phosphate Battery |
| Battery Cycle Life (Durability) | 4000 cycles(After 4000 cycles, the battery capacity can still remain at 70% of its original capacity.) |
| Type of Product Output Current | Pure sine wave |
| Product Dimensions (cm) (W)Length × (D)Width × (H)Height | 35.6 × 26.0 × 28.3 cm |
| Product Weight | About 14.5 Kg |
| Product Color | Black |
| Product AC Input Specification | 220 V-240 V~ 50 Hz, 10 A Max. |
| Minimum Power Required for Product AC Input | 1200±50 watts or more |
| DC Input Specification (Solar Power Input Specification) | Compatible with 12–60V; Single port use: current limit is 11A, maximum input power is 400W, Dual ports use: current limit is 22A, maximum input power is 800W |
| DC Input Specification (Car Charger Input Specification) | 12V, current limit 11A |
| Number of Input Ports When Charging Product with DC (Panel Charger/Car Charger) | 2 |
| Input Port for Charging Product with Solar Panel | DC8020 |
| Input Port for Charging Product with Car Charger Port | DC8020 |
| Product AC Charging Time | Ca. 1.7 hours |
| Product Charging Time with Car Charger Port | Ca. 14.5 hours |
| Product Charging Time with Solar Panel Solarsaga40 | No verified data |
| Product Charging Time with Solar Panel Solarsaga80 | 1 piece: Ca. 22 hours; 2 pieces: Ca. 11 hours; 4 pieces: Ca. 6 hours |
| Product Charging Time with Solar Panel Solarsaga100 | 1 piece: Ca. 18 hours; 2 pieces: Ca. 9 hours; 4 pieces: Ca. 4.5 hours |
| Product Charging Time with Solar Panel Solarsaga200 | 1 piece: Ca. 9 hours; 2 pieces: Ca. 4.5 hours; 4 pieces: Ca. 2 hours |
| Product AC Output Specification | 230V, 50Hz, 2000W |
| Product Maximum Instantaneous Discharge Power | 4000W |
| Number of Product AC Output Ports | 3 |
| AC Output Frequency | This device features selectable 50Hz/60Hz dual-frequency AC output. Auto Mode (Recommended for initial use): Upon first AC charging connection, the device will automatically detect and lock the output frequency based on the local grid standard. Manual Mode: Press and hold the AC output button to toggle between 50Hz and 60Hz. The selected frequency is displayed on the screen in real time. Default Setting: The factory default output frequency is 50Hz. |
| Product Car Charger Port Specification | 12V/10A |
| Number of Product Car Charger Ports | 1 |
| Number of Product USB Ports | 4 |
| Product USB-A Port Output Specification | Maximum 18W |
| Product Specification for Input via USB-C Port | No USB-C input port |
| Product USB-C Port Output Specification | Maximum 100W |
| Temperature Range for Product Charging | 0℃-40℃ |
| Temperature Range for Product Operation | -10°C-45°C |
| Temperature Range for Product Storage | 1 month -20℃-45℃ (-4℉-113℉); 3 months 0℃-45℃ (32℉-113℉); 1 year 0℃-25℃ (32℉-77℉) |
| Material of Product Housing | PC+ABS High-strength plastic |
| Product Warranty Period | The standard warranty period is 3 years. After registering for warranty, it can be extended by 2 years, for a maximum of 5 years of warranty. Purchased on the official website: Automatic warranty extension (no registration required). Orders purchased on Amazon or from dealers require customers to register for the extended warranty themselves. |
| Package list | 1* Explorer 1000 Plus; 1* Car Charging Cable ; 1* AC Charging Cable; 1* User Manual; |
| Noise Level of Product Cooling Fan | ≤45dB |
| Standby Power Consumption | 10W~15W |
| Does it Have EPS Function | Connect the plug of the appliance to the AC output port of the portable power supply, and use the AC charging cable to connect the portable power supply to a household outlet. Even in the event of a power outage, it has an EPS function that switches to battery power within 20ms (0.020 seconds). It can continue to supply power within the remaining battery capacity of the portable power supply, even in an emergency power outage. Please note that the EPS function does not support 0ms switching. Therefore, for devices that require full UPS functionality (uninterruptible power supply), such as data servers or workstations, etc., please do not use, we apologize for the inconvenience. |
| Are Additional Accessories Needed When Connecting to the Board | For connecting 1 or 2 solar panels: The included cables in the package can be used, no additional purchase needed; For connecting 3 solar panels: Requires 1 SolarSaga adapter (Pro/Plus/V2) ×1; For connecting 4 solar panels: Requires 2 SolarSaga adapters (Pro/Plus/V2) ×2 |
| Maximum Number of Panels That Can Be Connected | Supports connection of 1/2/4 panels |
| Can Products be Charged | When using the AC output of portable power supply A to charge this power supply, if A's 'AC output' is 1200W+50W or above, we support it. |
| Maximum AC output power during simultaneous charging and discharging | 2000W |
| Maximum DC output (car charging port output) power during simultaneous charging and discharging | 12V,10A, maximum 120W |
| Can the product connect to 2 solar panels | It is supported. The two DC input ports are independent, so panels with different power levels can be connected. |
| Can the product connect to 3 or more solar panels | It is supported.Connection of 3 panels: Use SolarSaga adapters to combine 2 panels into DC input 1; connect the remaining 1 panel directly to DC input 2. Ensure all panels connected through SolarSaga adapters have the same output and model (e.g., all are 100W (JS-100F) or all are 200W (JS-200D)); do not connect all 3 panels through one adapter (risk of voltage overload). Connection of 4 panels: Combine 2 panels through each adapter and connect them to DC inputs 1 and 2 respectively; ensure all panels connected through SolarSaga adapters have the same output and model (e.g., all are 100W (JS-100F) or all are 200W (JS-200D)). Additionally, when using both DC input ports, ensure the number of connected panels is the same. |
| Are the two DC input ports parallel or independent | Independent |
| Connection rules when both DC ports are used simultaneously | Each port can connect up to 2 panels. The power station has two ports and can directly connect panels with different outputs. However, when connecting multiple panels through SolarSaga adapters, the output and model of all panels connected to the SolarSaga adapter must be consistent (e.g., all are 100W (JS-100F) or all are 200W (JS-200D)). Also, when using both DC input ports, ensure the number of connected panels is consistent. |
| Can the product charge using both solar panels and car charging at the same time | Yes |
| Can the product charge using two car charging cables simultaneously | Yes |
| Is it expandable | Has an expansion feature that supports the 1000plus expansion battery. Up to 3 expansion batteries can be used simultaneously. |
| Is there a corresponding APP | Yes |
| Does it have waterproof and dustproof functions | No |
| Can the AC output frequency be switched | Yes |
| Does it have parallel machine function | Yes |
| Does it have LED lighting | Yes |
| Can it charge with fast charging on the road | Yes |
| Charging time with fast charging on the road | No verification data |
| Can wall charging and Solar charging be performed simultaneously | Yes |
| Can the Energy Saving Mode be turned off | Yes |
| Is the real-time system status visible in the app | Yes |
| Is remote control of AC/DC output circuits available in the app? | Yes |
| Is it possible to set timers for the display’s sleep mode in the app? | Yes |
| Can the built-in LED work light be controlled from the app? | Yes |
| Is it possible to set automatic shutdown in the app | Yes |
| Is it possible to set Battery Saving Mode in the app | Yes |
| Is it possible to set Quiet Charging Mode in the app | Yes, but if connected to the battery pack, settings cannot be made. |
| Can product specifications be viewed in the app | Yes |
| Can the user manual be accessed through the app | Yes |
| Can the device be shared using a QR code | Yes |
| Can the temperature display be set in the app | Yes |
| Is it possible to configure the system language through the app | Yes |
| Is it possible to set the Battery saving mode (15% to 85%) in the app | Yes, but if connected to the battery pack, settings cannot be made. |
| Is it possible to adjust the charging range of the battery shallow charge and discharge mode in the app | No |
| Is it possible to set the emergency charging mode in the app | No |
| Does it have solar power generation analysis (Analytics) function | No |
| Does it have a timed charging (charging plan) function | No |
| Does this system have a Self-consumption Mode | No |
| Can the Wi-Fi MAC address be viewed in the app | No |
| Is it possible to set AC charging speed in the app | No |
| Can the AC/DC output time be set through the APP? | No |
| Does it support simultaneous charging and discharging? | Yes, it is supported. Moreover, our product is designed so that it does not burden the battery during pass-through charging, so using it while charging will not affect the lifespan of the portable power supply. Please use with confidence. |
| Protocol-QC3.0 | yes |
| Protocol-PD | yes |
| BMS Protection System | 12 Types of Protection |
| Temperature Control Probes | x5 |
| Fire Resistance Rating | UL 94-V0 |
| Shock-Resistant Level | 9 Level |
| Location of the SN | The SN is located on the back of the device. |
| SN Format | A combination of 15 digits in total. |
| How to turn off the device | Press and hold the power button for 3 seconds. |
| How to reset the device | Press and hold both the Power and USB buttons simultaneously for five seconds. The screen will briefly turn off and then relight, displaying the remaining battery percentage — this confirms the reset was successful. |
| Can Wi-Fi/Bluetooth be reset separately | Yes |
| How to reset Wi-Fi/Bluetooth | Press and hold both the Power and USB buttons simultaneously for five seconds. The screen will briefly turn off and then relight, displaying the remaining battery percentage — this confirms the reset was successful. |
| How to activate the Bluetooth/Wi-Fi module after it has been turned off. | Press and hold the USB and AC buttons simultaneously for 3 seconds. |
Explorer 1000 Plus Basic Information
3 user found this helpful