| Battery Capacity | 288Wh |
| Type of Battery Used | Lithium Iron Phosphate Battery |
| Battery Cycle Life (Durability) | 3000 cycles(After 3000 cycles, the battery capacity can still remain at 80% of its original capacity.) |
| Type of Product Output Current | Pure sine wave |
| Product Dimensions (cm) (W)Length × (D)Width × (H)Height | 23 × 15.5 × 16.7 cm |
| Product Weight | About 3.75Kg |
| Product Color | Black |
| Product AC Input Specification | 220 V-240 V~ 50 Hz, 10 A Max. |
| Minimum Power Required for Product AC Input | 200±20 watts or more |
| DC Input Specification (Solar Power Input Specification) | Compatible with 12-27V;
current limit is 5A max, maximum input power is 100W |
| DC Input Specification (Car Charger Input Specification) | 12-27V, 5A max, 100W max |
| Number of Input Ports When Charging Product with DC (Panel Charger/Car Charger) | 1 |
| Input Port for Charging Product with Solar Panel | USB-C |
| Input Port for Charging Product with Car Charger Port | USB-C |
| Product AC Charging Time | About 2 hours |
| Product Charging Time with Car Charger Port | About 6 hours |
| Product Charging Time with Solar Panel Solarsaga40 | 1 piece: about 9.5 hours |
| Product Charging Time with Solar Panel Solarsaga80 | 1 piece: about 6.3 hours |
| Product Charging Time with Solar Panel Solarsaga100 | 1 piece: about 4.6 hours |
| Product Charging Time with Solar Panel Solarsaga200 | When solar charging, the maximum input power is 100W, therefore it is not possible to connect a 200W solar panel. |
| Product AC Output Specification | 230V, 50Hz, 300W |
| Product Maximum Instantaneous Discharge Power | 600W |
| Number of Product AC Output Ports | 1 |
| AC Output Frequency | This device features selectable 50Hz/60Hz dual-frequency AC output.
Auto Mode (Recommended for initial use): Upon first AC charging connection, the device will automatically detect and lock the output frequency based on the local grid standard.
Manual Mode: Press and hold the AC output button to toggle between 50Hz and 60Hz. The selected frequency is displayed on the screen in real time.
Default Setting: The factory default output frequency is 50Hz. |
| Product Car Charger Port Specification | 12V/10A |
| Number of Product Car Charger Ports | 1 |
| Number of Product USB Ports | 3 |
| Product USB-A Port Output Specification | 5V⎓ 3A, up to 15W |
| Product Specification for Input via USB-C Port | 12V-27V,5A, up to 100W |
| Product USB-C Port Output Specification | Up to 100W |
| Temperature Range for Product Charging | 0℃-40℃ |
| Temperature Range for Product Operation | -10°C-45°C |
| Temperature Range for Product Storage | 3 months: -20-45°C;
6 months: -10-25°C |
| Material of Product Housing | PC+ABS High-Strength Plastic |
| Product Warranty Period | The standard warranty period is 3 years. After registering for warranty, it can be extended for another 2 years, up to a maximum of 5 years of warranty.
Automatic warranty extension is provided when purchased from the official website (no registration required). Orders purchased from Amazon or dealers need to be registered by the customer for extended warranty. |
| Package list | 1* Explorer 300 Plus;
1* AC Charging Cable ;
1*User Manual |
| Noise Level of Product Cooling Fan | ≤45dB |
| Standby Power Consumption | 12W |
| Does it Have EPS Function | Connect the appliance's plug to the AC output port of the portable power station, and at the same time, use the AC charging cable to connect the portable power station to a household outlet. Even in the event of a power outage, the portable power station can automatically switch to battery power mode within 20 milliseconds (0.020 seconds) with its EPS function. During a sudden power outage, the portable power station can continue to power the connected devices within the battery's remaining capacity range. Please note that the EPS function does not support 0-millisecond switching. Therefore, for devices that require full UPS functionality (uninterruptible power supply), such as data servers or workstations, this is not suitable and should be noted in advance. |
| Are Additional Accessories Needed When Connecting to the Board | Requires the adapter '8020-USB-C' to be used together. However, SolarSaga 40 Mini already includes the adapter '8020-USB-C', so there is no need to purchase it separately. |
| Maximum Number of Panels That Can Be Connected | Up to 1 panel. Connecting 2 panels using a SolarSaga adapter or similar is not allowed (voltage exceeds the allowable range, there is a risk of failure). |
| Can Products be Charged | When charging this power station using the AC output from portable power station A, A's 'AC output' must be 200W+20W or higher to be compatible. |
| Maximum AC output power during simultaneous charging and discharging | 300W |
| Maximum DC output (car charging port output) power during simultaneous charging and discharging | 12V, 10A, maximum 120W |
| Can the product connect to 2 solar panels | Due to voltage limitations, only a maximum of 1 solar panel can be connected. Connecting 2 is not supported. |
| Can the product connect to 3 or more solar panels | Due to voltage limitations, only a maximum of 1 solar panel can be connected. Connecting 3 is not supported. |
| Are the two DC input ports parallel or independent | There is only one DC input port (the device's USB-C in/out port) |
| Connection rules when both DC ports are used simultaneously | Not applicable |
| Can the product charge using both solar panels and car charging at the same time | Not allowed be done |
| Can the product charge using two car charging cables simultaneously | Not allowed be done |
| Is it expandable | No expansion function |
| Is there a corresponding APP | Yes |
| Does it have waterproof and dustproof functions | No |
| Can the AC output frequency be switched | Yes |
| Does it have parallel machine function | No |
| Does it have LED lighting | Yes |
| Can it charge with fast charging on the road | No |
| Charging time with fast charging on the road | No verification data |
| Can wall charging and Solar charging be performed simultaneously | Yes |
| Can the Energy Saving Mode be turned off | Yes |
| Is the real-time system status visible in the app | Yes |
| Is remote control of AC/DC output circuits available in the app? | Yes |
| Is it possible to set timers for the display’s sleep mode in the app? | Yes |
| Can the built-in LED work light be controlled from the app? | Yes |
| Is it possible to set automatic shutdown in the app | Yes |
| Is it possible to set Battery Saving Mode in the app | Yes |
| Is it possible to set Quiet Charging Mode in the app | No |
| Can product specifications be viewed in the app | Yes |
| Can the user manual be accessed through the app | Yes |
| Can the device be shared using a QR code | Yes |
| Can the temperature display be set in the app | Yes |
| Is it possible to configure the system language through the app | Yes |
| Is it possible to set the Battery saving mode (15% to 85%) in the app | Yes |
| Is it possible to adjust the charging range of the battery shallow charge and discharge mode in the app | No |
| Is it possible to set the emergency charging mode in the app | No |
| Does it have solar power generation analysis (Analytics) function | No |
| Does it have a timed charging (charging plan) function | No |
| Does this system have a Self-consumption Mode | No |
| Can the Wi-Fi MAC address be viewed in the app | No |
| Is it possible to set AC charging speed in the app | No |
| Can the AC/DC output time be set through the APP? | No |
| Does it support simultaneous charging and discharging? | Yes, it is supported. Moreover, even when charging, it is made in a way that does not burden the battery, so using it while charging will not affect the lifespan of the portable power source. Please use it with confidence. |
| Protocol-QC3.0 | no |
| Protocol-PD | Yes |
| BMS Protection System | 12 Types of Protection |
| Temperature Control Probes | x5 |
| Fire Resistance Rating | UL 94-V0 |
| Shock-Resistant Level | 9 Level |
| Location of the SN | The SN is located on the back of the device. |
| SN Format | A combination of 15 digits in total. |
| How to turn off the device | Press and hold the power button for 3 seconds. |
| How to reset the device | Press and hold both the Power and USB buttons simultaneously for five seconds. The screen will briefly turn off and then relight, displaying the remaining battery percentage — this confirms the reset was successful. |
| Can Wi-Fi/Bluetooth be reset separately | Yes |
| How to reset Wi-Fi/Bluetooth | Press and hold both the Power and USB buttons simultaneously for five seconds. The screen will briefly turn off and then relight, displaying the remaining battery percentage — this confirms the reset was successful. |
| How to activate the Bluetooth/Wi-Fi module after it has been turned off. | Press and hold the USB and AC buttons simultaneously for 3 seconds. |
Comments
0 comments
Article is closed for comments.