| model_name | JE-2000C |
|---|---|
| Battery Capacity | 2042.8wh |
| Type of Battery Used | Lithium Iron Phosphate Battery |
| Battery Cycle Life (Durability) | 4000 cycles (After 4000 cycles, the battery capacity can still remain at 70% of its original capacity.) |
| Type of Product Output Current | Pure sine wave |
| Product Dimensions (cm) (W)Length × (D)Width × (H)Height | 47.3 × 35.9 × 37.3 cm |
| Product Weight | About 27.9 kilograms |
| Product Color | Black |
| Product AC Input Specification | 220 V-240 V~ 50 Hz, 10 A Max. |
| Minimum Power Required for Product AC Input | 1500 watts or more |
| DC Input Specification (Solar Power Input Specification) | Compatible with 17.5-60V; Single port use: Current limit is 12A, max input power is 700W, Dual ports use: Current limit is 24A, max input power is 1400W |
| DC Input Specification (Car Charger Input Specification) | 11-17.5V/8A, Current limit 8A, (Either using one or two DC input ports, the current limit is 8A.) |
| Number of Input Ports When Charging Product with DC (Panel Charger/Car Charger) | 2 |
| Input Port for Charging Product with Solar Panel | DC8020 |
| Input Port for Charging Product with Car Charger Port | DC8020 |
| Product AC Charging Time | About 1.7 hours |
| Product Charging Time with Car Charger Port | About 25 hours |
| Product Charging Time with Solar Panel Solarsaga40 | No verification data |
| Product Charging Time with Solar Panel Solarsaga80 | 1 piece: About 35 hours; 2 pieces: About 18 hours; 4 pieces: About 9 hours; 6 pieces: About 6 hours |
| Product Charging Time with Solar Panel Solarsaga100 | 1 piece: About 23 hours; 2 pieces: About 13 hours; 4 pieces: About 7 hours; 6 pieces: About 5.5 hours |
| Product Charging Time with Solar Panel Solarsaga200 | 1 piece: About 14 hours; 2 pieces: About 7 hours; 4 pieces: About 3.8 hours; 6 pieces: About 2 hours |
| Product AC Output Specification | 230V, 50Hz, 3000W |
| Product Maximum Instantaneous Discharge Power | 6000W |
| Number of Product AC Output Ports | 5 |
| AC Output Frequency | This device features selectable 50Hz/60Hz dual-frequency AC output. Auto Mode (Recommended for initial use): Upon first AC charging connection, the device will automatically detect and lock the output frequency based on the local grid standard. Manual Mode: Press and hold the AC output button to toggle between 50Hz and 60Hz. The selected frequency is displayed on the screen in real time. Default Setting: The factory default output frequency is 50Hz. |
| Product Car Charger Port Specification | 12V/10A |
| Number of Product Car Charger Ports | 1 |
| Number of Product USB Ports | 4 |
| Product USB-A Port Output Specification | Maximum 18W |
| Product Specification for Input via USB-C Port | No USB-C input port |
| Product USB-C Port Output Specification | Maximum 100W |
| Temperature Range for Product Charging | 0℃-40℃ |
| Temperature Range for Product Operation | -10°C-45°C |
| Temperature Range for Product Storage | 1 month -20℃-45℃ (-4℉-113℉); 3 months 0℃-45℃ (32℉-113℉); 1 year 0℃-25℃ (32℉-77℉) |
| Material of Product Housing | PC+ABS High-Strength Plastic |
| Product Warranty Period | The standard warranty period is 3 years. After registering for warranty, it can be extended by 2 years, with a maximum of 5 years warranty., Automatic warranty extension (no registration needed) when purchased from the official website. Orders purchased from Amazon or dealers require customers to register for the extended warranty themselves. |
| Package list | 1* Explorer 2000 Plus ; 1* Car Charging Cable ; 1* AC Charging Cable; 1*User Manual |
| Noise Level of Product Cooling Fan | ≤30dB |
| Standby Power Consumption | 10W~15W |
| Does it Have EPS Function | Connect the appliance plug to the AC output port of the portable power station, and simultaneously connect the portable power station to a home outlet with the AC charging cable, enabling the EPS function which allows the power station to automatically switch to battery power mode within 20 milliseconds (0.020 seconds) when a power outage occurs., Even in emergency power outages, the EPS function allows continuous power supply within the battery capacity range of the portable power station., , Please note that the EPS function does not support 0-millisecond switching. Therefore, for equipment that requires complete UPS functionality (uninterruptible power supply), such as data servers and workstations, it is not applicable and should be understood in advance. |
| Are Additional Accessories Needed When Connecting to the Board | 1 or 2 solar panels connection: Connect with the included cable. No additional purchase needed; 3 solar panels connection: Requires 1 SolarSaga adapter (Pro/Plus/V2); 4, 6 solar panels connection: Requires 2 SolarSaga adapters (Pro/Plus/V2) |
| Maximum Number of Panels That Can Be Connected | Supports connection of 1/2/3/4/6 panels |
| Can Products be Charged | When using the AC output of portable power supply A to charge this power supply, if A's 'AC output' power is 1500W or higher, it is compatible. |
| Maximum AC output power during simultaneous charging and discharging | 3000W |
| Maximum DC output (car charging port output) power during simultaneous charging and discharging | 12V,10A, maximum 120W |
| Can the product connect to 2 solar panels | It is supported. However, the two DC input ports are in parallel, so solar panels with different power cannot be connected at the same time. That is, it is not possible to connect a 100W panel to one port and a 200W panel to the other. |
| Can the product connect to 3 or more solar panels | It is supported. Three panels can be connected as follows: Use an adapter to combine three panels into a connection to DC input 1; the conversion adapter in the front of the panel, depending on the model of the panel, needs to be removed or directly connected to the SolarSaga adapter. All panels connected to the SolarSaga adapter must have the same output and model. (For example: all 100W (JS-100F) or all 200W (JS-200D)). Four-panel connection: Combine two panels using adapters and then connect them to DC inputs 1 and 2 respectively. Six-panel connection: Combine three panels using adapters and then connect them to DC inputs 1 and 2 respectively. Notes for 4/6 panel connections: Notes for using two DC ports at the same time (connection rules): The number of panels connected to each port must be the same (for example: 2+2). The two ports can connect a total of up to 6 panels at most. Please use solar panels of the same model. If different models of panels need to be mixed, all of the following conditions must be met: - Maximum output wattage is the same - Open circuit voltage is the same - Rated voltage (working voltage) is the same. ＜Mixed usage examples＞ 200D (Maximum output: 200W / Rated voltage: 20V / Open circuit voltage: 24.8V) 200C (Maximum output: 200W / Rated voltage: 20V / Open circuit voltage: 24.8V) As shown above, as long as the maximum output, rated voltage, and open circuit voltage are exactly the same, even if the models are different, they can be mixed and used. |
| Are the two DC input ports parallel or independent | Parallel |
| Connection rules when both DC ports are used simultaneously | The power station has two DC input ports, and each port can connect up to three panels. The output and model of the panels connected to each port must be the same. (For example: all 100W (JS-100F) or all 200W (JS-200D)) In addition, when using both DC input ports at the same time, the number of panels connected must also be the same. |
| Can the product charge using both solar panels and car charging at the same time | Not allowed |
| Can the product charge using two car charging cables simultaneously | Not allowed |
| Is it expandable | It has an expansion function that can correspond to the extended battery for 2000plus. In addition, up to five extended batteries can be used simultaneously. |
| Is there a corresponding APP | Yes |
| Does it have waterproof and dustproof functions | No |
| Can the AC output frequency be switched | Yes |
| Does it have parallel machine function | Yes |
| Does it have LED lighting | No |
| Can it charge with fast charging on the road | Yes |
| Charging time with fast charging on the road | No validation data |
| Can wall charging and Solar charging be performed simultaneously | Yes |
| Can the Energy Saving Mode be turned off | Yes |
| Is the real-time system status visible in the app | Yes |
| Is remote control of AC/DC output circuits available in the app? | Yes |
| Is it possible to set timers for the display’s sleep mode in the app? | Yes |
| Can the built-in LED work light be controlled from the app? | No |
| Is it possible to set automatic shutdown in the app | Yes |
| Is it possible to set Battery Saving Mode in the app | Yes |
| Is it possible to set Quiet Charging Mode in the app | Yes, it is possible, but setting is not available when connected to the battery pack. |
| Can product specifications be viewed in the app | Yes |
| Can the user manual be accessed through the app | Yes |
| Can the device be shared using a QR code | Yes |
| Can the temperature display be set in the app | Yes |
| Is it possible to configure the system language through the app | Yes |
| Is it possible to set the Battery saving mode (15% to 85%) in the app | Yes, but cannot be set when connected to the battery pack. |
| Is it possible to adjust the charging range of the battery shallow charge and discharge mode in the app | No |
| Is it possible to set the emergency charging mode in the app | No |
| Does it have solar power generation analysis (Analytics) function | No |
| Does it have a timed charging (charging plan) function | No |
| Does this system have a Self-consumption Mode | No |
| Can the Wi-Fi MAC address be viewed in the app | No |
| Is it possible to set AC charging speed in the app | No |
| Can the AC/DC output time be set through the APP? | No |
| Does it support simultaneous charging and discharging? | Yes, it is supported., Additionally, even when charging, the product is designed not to burden the battery, so using it even while charging will not affect the lifespan of the portable power supply. Please use with confidence. |
| Protocol-QC3.0 | yes |
| Protocol-PD | yes |
| BMS Protection System | 12 Types of Protection |
| Temperature Control Probes | x9 |
| Fire Resistance Rating | UL 94-V0 |
| Shock-Resistant Level | 9 Level |
| Location of the SN | The SN is located on the back of the device. |
| SN Format | A combination of 15 digits in total. |
| How to turn off the device | Press and hold the power button for 3 seconds. |
| How to reset the device | Press and hold both the Power and USB buttons simultaneously for five seconds. The screen will briefly turn off and then relight, displaying the remaining battery percentage — this confirms the reset was successful. |
| Can Wi-Fi/Bluetooth be reset separately | Yes |
| How to reset Wi-Fi/Bluetooth | Press and hold both the Power and USB buttons simultaneously for five seconds. The screen will briefly turn off and then relight, displaying the remaining battery percentage — this confirms the reset was successful. |
| How to activate the Bluetooth/Wi-Fi module after it has been turned off. | Press and hold the USB and AC buttons simultaneously for 3 seconds. |
Explorer 2000 Plus Basic Information
1 user found this helpful