| Model | JAM60D41-500/LB |
|---|---|
| Dimensions | 1953±2mm×1134±2mm×30±1mm |
| Connection specification | MC4-kompatibel |
| Weight (kg) | 27,3 kg |
| Maximum power – Pmax (W) | 500 |
| Voltage at Pmax (Vmp) | 38,26 |
| Current at Pmax – Imp (A) | 13,07 |
| Open-circuit voltage (V) | 45 |
| Short-circuit current – Isc (A) | 14,05 |
| Module efficiency – ηₘ (%) | 22,6 |
| Power tolerance (W) | 0~+3% |
| Maximum system voltage (VDC) | 1500VDC |
| Maximum series fuse rating (A) | 30 |
| Output cable | Portrait:300mm(+)/400mm (-) Landscape: 1200mm(+)/1200mm(-) |
| Pmax temperature coefficient (%/°C) | -0.290%/℃ |
| Voc temperature coefficient (%/°C) | -0.2509%C |
| Operating temperature (°C) | -40℃~+85℃ |
| Nominal module operating temperature (NMOT) (°C) | 45±2℃ |
| Scope of delivery | 500 Wp bifacial rigid panel |
| Is the product sold? | Yes |
| Warranty | 25 Years |
| IP rating of the terminal box | IP68 |
| Is the solar panel supplied with a mounting structure? | No |
| Rated power (STC) | 500 W |
| Cell type | N-type, monocrystalline, bifacial (glass-glass) |
| Frame color | Schwarz (Full Black) |
| Are additional components required? | yes |
| Is professional installation required? | yes |
| Is a Y-cable included in the delivery? | no |
| Main application scenarios | Suitable Locations: - Rooftops (residential, commercial, industrial) - Ground-mounted solar power plants - Carports - Building facades - PV tracking systems Environmental Conditions: - Ambient temperature: -40°C to 40°C (monthly average) - Module operating temperature: -40°C to 85°C Areas to Avoid: - Locations prone to water accumulation or submersion - Highly corrosive environments (e.g., chemical plants) - Areas with flammable gases - Extreme wind or sandstorm regions (without proper fixed mounting) Special Considerations: - Seaside installation:** 50–500 meters from the sea, with anti-corrosion measures - High wind / heavy snow areas: Fixed mounting systems recommended; avoid trackers - Dusty environments:** Regular cleaning required to prevent hot spots - Low tilt angle installations:** Use anti-dust modules; minimum tilt angle of 2° - Lightning-prone areas:** Lightning protection recommended |
| Installation method (differentiated by application scenarios) | Clamp Mounting - Use metal clamps to secure modules to mounting rails - Clamp specifications: - Width: ≥ 50mm - Thickness: ≥ 3mm - Material: Aluminum alloy 6063-T5 - Bolt: Stainless steel M8, torque 18–24 N·m - Clamp must overlap the frame by 8mm to 12mm - Do not block drainage holes or touch the glass Bolt Mounting - Fix modules through pre-drilled holes on the rear frame flange - Bolt specifications: - M8 or M6 stainless steel - Use washers and spring washers - Recommended torque: - M8: 15–20 N·m - M6: 8–12 N·m Rail Mounting - Rails can be installed parallel or perpendicular to the module's long frame - Rail must overlap the frame by at least 20mm - Recommended clearance between module bottom and ground/roof: ≥ 1m Electrical Installation - Cables: Weather-resistant, UV-resistant, minimum 4mm² - Connectors: Keep dry and clean; avoid long exposure to sunlight or water - Series/parallel connections must match electrical ratings Grounding - Only for framed modules - Grounding methods: - Grounding bolt (torque: 2.3 N·m) - Unused mounting holes - Third-party certified grounding devices - Grounding wire: 12 AWG copper wire recommended |
500 Wp Bifacial Rigid Panel (JA) Basic Information
1 user found this helpful